Product highlights

• Home theater accessory repeats the ir signal to a dvd player, stb box, receiver or other a/v source with an ir sensor; route the infrared remote control extender cable out of sight with a wall mounted tv; install the ir transmitter end in a concealed equipment closet to hide a catv box and control it remotely
• Usb powered ir extension cable has an integrated 6 foot y-cable to receive 5v usb power; usb cable on the ir remote extender cable connects to a tv usb power port or to a usb wall charger
• Ir remote control cable extends the signal to a video source like a blu-ray player so it can be controlled from your tv; red led in ir receiver bulb verifies the signal transmission
• Simple installation of this lightweight ir cable; locate the ir blaster near the source sensor to repeat the signal to the source; place the ir receiver in a convenient location with line of sight of your hand-held remote; ir tx and rx cables have adhesive circles on the back for mounting
• Universal compatibility of ir extender cable with most a/v equipment with infrared sensors (not rf); 30 degree ir receiver angle provides plenty of leeway to get the right angle with your remote

Product highlights

• Compatible with all ir controlled devices! we have tested our ir repeater kits with thousands of ir devices to make sure that they work and work well with all frequencies of ir dual band included. no matter the make/model of your devices, as long as they use an ir remote control, our ir extender kit will work with it. charter, cisco, cox, denon, directv, dish network, m...
• Resistant to interference from stray infrared sources such as plasma tv's & cfl lightbulbs! worried that your plasma tv or cfl bulbs will cause interference with this ir repeater just like your old ir repeater you bought years ago? worry no more! with our new plasma resistant technology nearly all of these trouble causing stray ir signals are filtered out! no more rando...
• Streamline your entertainment center by hiding your cable box, receiver, amp, roku & other ir controlled devices hidden behind closed doors. no more boxes sitting out on the shelf or leaving cabinet doors open when your watching tv just so you can use your remote control! give your living space a more refined, more streamlined look! control 1 to 4 devices using our kit ...
• Simple, easy & compact setup with our all-in-one cable ir repeater / remote control extender kit. plug the usb into your tv, set top box or other device for power (you may also use a wall adapter - sold separately), then paste the emitter using it's own adhesive over the ir receiver on the device you wish to control. lastly, place the ir receiver end in the line of sigh...
• Excellent manufacturer warranty from bafx products. even though this is extremely inexpensive, bafx products stands behind everything we sell or we won't sell it. your all-in-one ir extender is covered by our 1 year warranty against manufacturing defects and is super easy & simple to claim should the need arise! we also extend amazon's normal 30 day return period with o...

Product highlights

Product highlights

• Connector: all-copper sma male to sma female adapter, to ensure high quality communication.
• Feature: high temperature resistance, acid resisitance, corrosion resistance, high frequency low loss and low impedance, wide applicability.
• Sma male to sma female rf coaxial cable adapter for router, antenna, signal enhancer, wireless adapter etc.
• Connecting line: 50cm(20 inch) 50 ohm impedance rg316 military quality cable.
• Package include: 2pcs rg316 sma male to sma female adapter with cable.

Product highlights

• Improved! now compatible with all ir controlled devices with better performance, no lag & better ease of use. now also compatible with marantz devices! compatible with all brands of components such as: uverse, att, cisco, scientific atlanta, yamaha, sony, logitech, verizon, lg, apple & more!
• Compact – a smaller footprint than many other kits on the market allows the main block to placed just about anywhere along with a new and smaller ir receiver for a more discreet look. with the addition of mounting tabs on either side it can even be affixed to a wall, cabinet or ceiling!
• Build – create the a/v setup of your dreams with the help of our infrared repeater kit. our kit allows you to place any ir controlled device out of sight of the remote control and still be able to control it. put the cable box, dvd player & roku in a closet hidden from view, close the door and still be able to use the remote control.
• Warranty & support – bafx products offers a 1 year warranty against manufacturing defects with a simple & super easy claims process. not to mention our friendly and knowledgeable usa based support who are ready to help answer your questions and assist in getting you setup!
• Control – with the provided components you can control up to 8 infrared devices (expandable to 12 devices) from one location with the included ir receiver (expandable to 3 receivers). extra receivers and transmitters may be purchased separately.

Product highlights

• Go room-to-room and control your components from up to 100 feet away
• 433.92 mhz base unit emits ir signal to your nearby devices
• Refer the faq below for troubleshooting
• Specially designed 2/3 aaa batteries are rechargeable in base station
• Convert as many remotes as you like with extra battery transmitters

Product highlights

• Works with verizon fios cable boxes model qip, chs,ipc, vms series except qp6xxx and qip2500, also works with dta271, dta50 etc. will not work with sa 4000hdc series,4200/hdc,4240,4250/hdc,8300/hd,8240/8260hdc box, uverse or a/v receivers,ir repeater kits, or port on the back of any box stating serial. it is for data and technicians use
• Simple plug and play. plugs directly into the rear ir in port. unplug the power from the cable box then plug the ir receiver into the ir in port. plug in the power for the box. the box will reboot
• Tip - 5v ring - signal sleeve - ground 38-56khz external ir receiver for arris,pace,bell,rogers, cisco, scientific atlanta, hdmi matrix, hdmi extender etc
• Look at side pictures to compare size of competitors. ours is only 1/2in wide. thinnest available! perfect size to blend into current flat screen frames.hide your cable box in a cabinet, down in the basement or a/v rack or room using this small (.53 wide x 1.12 long x .43in tall )ir receiver with 9 ft lead to 3.5mm gold stereo plug.
• Printed and packaged in the usa. listed on amazon since 2009 with 23 years expierence manufacturing and supplying the cable and hotel industry.

Product highlights

• Will not work with sa 4000hdc series,4200/hdc,4240,4250/hdc,8300/hd,8240/8260hdc box, a/v receivers,tvs or ir repeater kits
• Replaces cisco/scientific atlanta ir extender 1004648,4029013,4022323
• Works with verizon fios, comcast, scientific atlanta explorer,cisco,pace,motorola,arris, and dta set top boxes
• Look at side pictures to compare size of competitors. ours is only 1/2in wide. thinnest available! perfect size to blend into current flat screen frames.hide your cable box in a cabinet, down in the basement or a/v rack or room using this small (.53 wide x 1.12 long x .43i tall )ir receiver with 9 ft lead to 3.5mm gold stereo plug.
• 23 years experience manufacturing and supplying the cable and hotel industry

Product highlights

• {home theater accessory} repeats the ir signal to a dvd player, stb box, receiver or other a/v source with an infrared sensor; route the cable out of sight with a wall mounted hdtv; install the ir transmitter end in a concealed equipment closet to hide a catv box and control it remotely
• {usb powered ir }extension cable has an integrated 6 foot y-cable to receive 5v usb power; connect to an hdtv usb port or to a usb wall charger(tip: devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. otherwise, the signal from the remote control and the remote control signal after forwarding will ...
• {ir remote control} cable extends the signal to a video source like a blu-ray player so it can be controlled from your hdtv; red led in ir receiver bulb verifies the signal transmission(operating range:20-60hz)
• {simple installation} of this lightweight ir cable; locate the ir blaster near the source sensor to repeat the signal to the source; place the ir receiver in a convenient location with line of sight of your hand-held remote; ir tx and rx cables have adhesive circles on the back for mounting
• {universal compatibility} with most a/v equipment with infrared sensors (not rf); 180 degree ir receiver angle provides plenty of leeway to get the right angle with your remote.remote control signal receiving real-time response to fast forward without delay

Product highlights

• Wide compatibility: compatible with most of ir controlled devices, eg, dvd、dvr、iptv, satellite set-top boxes, digital tv set-top boxes, pc and so on. let your life be simple with pakite transmitter and receiver kit.
• Compact and double modes: a smaller footprint than many other kits on the market to help save space, two power supply modes (usb or battery power supply) for your choice. note: we suggest to use usb power supply for the receiver because of the big power consumption.
• Long control distance: reliable(stably without delay) and up tp 650ft long-range wireless infrared ir reception and transmission.
• Dual band: carrier frequency 38khz/56khz(manual switch on the receiver end) frequency 433.92mhz ±500khz superheterodyne.
• Warranty & support: we promise you a 30-day money back and 90-day limited product service. 24hours online customer service.